M blog/visor.html → blog/visor.html

@@ -52,27 +52,8 @@ <section class="image-blog">
             <div>
                 <p>First this one removed the rubber ring and straps to (somewhat badly) apply the car tinting foil. It
                     has heard that other units had better success by first creating a paper template to cut out the
-                    perfect shape.</p>
-                <p>This one attached the ESP32 directly to its exhaust vent, below the snoot cap.</p>
-                <b>This has been since solved differently, see: <a href="#ESP-casing"
-                        aria-hidden="true">ESP-casing</a></b>
-
-                <p> This has 2 downsides:
-                </p>
-                <ul>
-                    <li>Corrosion: if your exhaust fumes contain things harmful to electronics (like for example water
-                        vapor) they WILL corrode over time</li>
-                    <li>The default 3M 6800 style snoot does not fit an ESP of this size, so tape will be needed to
-                        "close" the snoot</li>
-                </ul>
-                <p>It also has 2 minor upsides:</p>
-                <ul>
-                    <li>Corroding and being held together by duct tape is kinda gender</li>
-                    <li>less work (this one is lazy)</li>
-                </ul>
-                <p>One will have to replace the duct tape and ESP over time (it is still on it's first ESP after a few
-                    months of visoring), because both do not appreciate the moisture.</p>
-            </div>
+                    perfect shape and putting a bit of soap water between the visor and foil when applying it. Ignore the ESP32 directly attached to its exhaust vent, this has been since solved differently.</p>
+                </div>
             <div><img src="/assets/blog/visor/1.webp"
                     alt="Visor with the rubber ring and straps removed sitting on a table.
                     The snoot has also been detatched revealing a microcontroller taped on the exhaust vent.
@@ -80,22 +61,18 @@ There is car tinting foil applied to the faceplate of the visor with some visible bubbles and folds."></div>
         </section>
         <section class="image-blog">
             <div>
-                <p>One may not be surprised how the LED-matrices are held in place after reading the previous paragraph.
-                    It's only zip-ties and friction. They need to be readjusted every now and then but mostly stay put
-                    nicely like this. The matrices can be daisy chained so they will only have to be connected to the
-                    ESP with one wire each.</p>
+                <p>TODO: matrix</p>
             </div>
-            <div><img src="/assets/blog/visor/2.1.webp"
-                    alt="The inside of the assembled visor, with 2 zip-tied together daisy-chained LED-matrices inside. They bent to fit the visor shape and loosely connected to the ESP through the back of the exhaust vent.">
+            <div><img src=""
+                    alt="">
             </div>
         </section>
         <section class="image-blog">
             <div>
-                <p>The ESP can be connected via USB-C through the hole in at the bottom of the snoot. This one also put
-                    a little NFC-sticker on its snoot, so it can sniff other peoples devices to share contact info.</p>
+                <p>TODO: esp</p>
             </div>
-            <div><img src="/assets/blog/visor/3.webp"
-                    alt="The assmebled visor from the front, showing an experession of 2 purple-glowing boxes on the faceplate.">
+            <div><img src=""
+                    alt="">
             </div>
         </section>
         <section class="image-blog">
@@ -111,22 +88,13 @@ <h2><a href="#mods" aria-hidden="true">#</a> Modifications</h2>
         <p>
             List of modifications and changes this one has made to its visor.
         </p>
-        <section id="ESP-casing">
-            <h3><a href="#ESP-casing" aria-hidden="true">##</a> [WIP] Bayonet mount ESP32 casing</h3>
+        <section id="Fan">
+            <h3><a href="#Fan" aria-hidden="true">##</a> Mount for a 40mm fan</h3>
             <section class="image-blog">
                 <div>
-                    <p>
-                        It is in the process of making a casing for the ESP32 that can twist onto the bayonet mount
-                        of
-                        the visor, since that seems like a better spot for it then inside the snoot.
-                        This iteration is still far from ideal as some pins have to get bent to connect the wires
-                        properly and the cap does not attach like it should so tape is needed.
-                    </p>
+                    <p>TODO: fan</p>
                 </div>
-                <div>
-                    <img src="/assets/blog/visor/5.1.webp" alt="">
-                    <img src="/assets/blog/visor/5.2.webp" alt="">
-                </div>
+                <div><img src="" alt=""></div>
             </section>
         </section>
         <section id="Meshtastic-casing">